TEREX C4000 recall: Plate weld may crack
Terex C4000, C5000, C6000 and General 65 digger derrick trucks may have a plate weld that can crack and allow a retaining pin to separate; the weldment plate will be inspected and replaced as needed at no charge.
A weld concern in the pole-guide assembly can allow a retaining pin to come apart from its intended position. The official record says that could allow the pole guide arm to fall, creating an injury hazard for people near the truck.
What the official recall record says
TEREX: C4000, C5000, C6000 and other models
An insufficient weld on the plate weldment may crack, which can cause the retaining pin to separate. Without that pin, the pole guide arm may fall and increase the risk of injury to people around the truck. Ring Power will inspect the weldment plate and replace it when necessary at no charge.
Official record
- NHTSA recall ID: 26V534000
- Vehicles listed: TEREX C4000 (2026, 2025, 2024, 2023, 2022, 2021, 2020, 2019); TEREX C5000 (2026, 2025, 2024, 2023, 2022, 2021, 2020, 2019); TEREX C6000 (2026, 2025, 2024, 2023, 2022, 2021, 2020, 2019); TEREX GENERAL 65 (2026, 2025, 2024, 2023, 2022, 2021, 2020, 2019)
- Potentially affected: 73
- Components: EQUIPMENT
- Report received: August 17, 2026
- Owner notification: Not provided in the source record
- Defect: Ring Power Corporation (Ring Power) is recalling certain 2019-2026 Terex C4000, C5000, C6000, and General 65 digger derrick trucks. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
- Safety consequence: Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.
- Remedy: Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power’s customer service at 1-904-737-7730. Ring Power’s number for this recall is UTC0001.
What owners should do next
Check the official record for the affected vehicle and contact Ring Power or an authorized dealer to arrange the stated inspection and any necessary replacement.
A headline cannot confirm whether a particular vehicle is affected. Use the official NHTSA recall lookup with the vehicle identification number and contact the manufacturer or an authorized dealer for vehicle-specific guidance.
Need a fuller vehicle history?
VINsmart offers paid vehicle-history reports. For current recall status and no-cost repair eligibility, use NHTSA or your vehicle manufacturer.
Advertisement — RecallWire may earn a commission if you purchase a VINsmart report through this link.
Sources used for this report.
References checked September 23, 2026.
National Highway Traffic Safety Administration. Safety Recall Report: Campaign 26V534000. Report received August 17, 2026. Accessed September 23, 2026.
To check a specific vehicle, use the official NHTSA VIN recall lookup.